baseplate holes?

[larams]

I was wondering what you guys do on your baseplates in order for the bobbins to be oriented properly? I noticed on the baseplates I have there is a hole for the main lead wire only on one side. So I have to drill a hole because if I don't the neck pickup will be facing the opposite direction of the bridge pickup. Do you guys drill holes too or is there a source for different baseplates that have holes on both sides? I could just add extra length of wire on the pickup that has the hole on the far side but I like my leads to all come out on the side closest to the guitar cavity.

[copperheadroads]

The neck & bridge humbuckers are made exactly the same way except for the difference in wind & the neck pickup is flipped so the wire hole will be at the top of the baseplate in the neck position.

[Justwannano]

Yeah I've drilled holes to run the wire to be as I wanted. All the bases from the kits I've purchased have been drilled the same.