Quarter Inch Magnet Rods, Wire Size

[gsgtrman]

Hello, I am new here and this seems to be a very informative place to hang!

I am looking for some simple information, but after searching I have been unsuccessful in finding the information I would like. I am planning on winding two Strat pickups with .25" A5 magnet rods. I am using these bobbins:
https://www.tone-kraft.com/the-jumbocaster-bobbin-kit/

I would like to get close to a Duncan SSL-4 spec. Can someone tell me what wire gauge would be best and a ballpark wind count?

Thanks in advance!

[Magnut]

Considering how much space the magnets take up compared to a standard pickup, I would first surmise that it is not the standard 42 gauge. If it was 43 gauge it would be about 8k. Based on the spec of 13k-ish. I would guess it is 44guage and around 10k winds.

[gsgtrman]

Thanks so much for the reply Magnut, I appreciate the insight.