Tascam TM D-1000 Broken AC Jack

[Crest421]

Hello,
First time post here, and any help will be greatly appreciated! I have a Tascam TM D-1000 which I think is a great machine, but the ac jack was damaged when someone put pressure on the AC plug-in, and now it won't power up. Does anyone know if this is a fix worth paying for? I opened the casing up, and the circuit board the jack is connected to does not appear to be cracked or broken.
Thank you in advance,
crest421

[Enzo]

The circuit board itself may be intact, but look VERY closely at the solder to the connector pins. And little cracks in that solder?

[jrfrond]

Does anyone know if this is a fix worth paying for?
crest421

Well, what's the alternative?

[Crest421]

Thanks for the posts!
jrfrond, just thinking that if the cost for repairing would be sky-high, then another way to go might be looking around for another mixer.....

[jrfrond]

I'm estimating that you are looking at about two hours of labor and possibly $10 for the part, IF that is all that is wrong. Here in NYC, that's a $260 repair, and we are at the top of the range in the country. You can make a determination from there.