Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Peavey CS800 transistor subs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Peavey CS800 transistor subs

    Got a CS800 with blown pre-drivers (7204 and 7205) Peavey subs are MPS-U10 and U60, but I can not cross to ON-Semi numbers! Does anyone know of subs for these?

  • #2
    MPSU10 and MPSU60 are already industry numbers. As far as I know, On Semi has not made those MPSU series for many years.

    You have a CS800X don't you?

    I have seen people use MPSW42/W92

    WHen I need those I cruise my transistor collection to see what might work
    Education is what you're left with after you have forgotten what you have learned.

    Comment


    • #3
      Yes, the MPSW42/W92 are good subs.
      If the transistor gets rather warm, you may want to consider purchasing the clip on heat sink.
      575200B00000G Aavid, Thermal Division of Boyd Corporation | Fans, Thermal Management | DigiKey

      Comment


      • #4
        MPSU10 and MPSU60

        I have a MOTHER-LOAD of those parts... somewhere. I think they are near the top of the pile.
        WARNING! Musical Instrument amplifiers contain lethal voltages and can retain them even when unplugged. Refer service to qualified personnel.
        REMEMBER: Everybody knows that smokin' ain't allowed in school !

        Comment


        • #5
          I believe it is an 800c version.
          That's a to92 package!
          Seems kind of small but the specs check out!!

          Comment


          • #6
            How about mpsa42/ mpsa92?

            Comment


            • #7
              OK, I'll get on the CS800C drawing.

              MPSW42 is a larger TO92 case. MPSA are the regular TO92 size.
              Education is what you're left with after you have forgotten what you have learned.

              Comment


              • #8
                MPSW42 and 92 are obsolete can also be hard to find. I wouldn't trust ebay type chinese sources, anyone have a good source?
                Originally posted by Enzo
                I have a sign in my shop that says, "Never think up reasons not to check something."


                Comment


                • #9
                  MPSW42/92 300v 500ma 1W

                  I have 8 of each right here on my desk.


                  There I just held them up to my screen.
                  Education is what you're left with after you have forgotten what you have learned.

                  Comment


                  • #10
                    Ok Enzo, THAT was freaking funny!

                    Comment


                    • #12
                      Enzo, What is your thought on MJE15034G and MJE15035?

                      Comment


                      • #13
                        Would probably work. I like that series and use them in several things. They would be overkill for that spot, but overkill doesn't mean it won't work.

                        As always make sure the E_B_C legs go in the right holes.
                        Education is what you're left with after you have forgotten what you have learned.

                        Comment


                        • #14
                          As always on subs! At least I can source these transistors!

                          Comment


                          • #15
                            At least I can source these through Digikey!

                            Comment

                            Working...
                            X