Connector help

[galaxiex]

Apologies if this is in the wrong place.

Need help identifying this connector and where to obtain.

I searched DigiKey and the Molex site with no luck.

Thanks for any assistance.

[shortcircuit]

Not sure on the size but this looks close...CBK Supply - Ic-Conn T-shaped 2-pin Dc connector 1/4" push-fit blades; male & female housings on Amazon , if size is different, maybe CBK Supply can help.

[galaxiex]

Thanks,
very similar but mine doesn’t have the latch.
Friction fit.
It’s the connector for a car heat/ac blower motor on the Vintage Air Magnum Gen IV unit.

It does have 1/4" spade terminals.

Edit; The Vintage Air website is not much help.
I'll shoot them an email.

Or.... I'll just cut the connectors off and use some commonly available power connectors.