Behringer ACX1000 schematic and/or info

[Bill Zucker]

Enzo, except that when the chip is firmly glued down, Chip Quik won't help. The device I dealt with had to be snapped out before it would budge. I agree that it would help for the normal case though.

Zac, without the schematics, you're pretty screwed. Like I said earlier, last year your support team helped out with a copy after sending back a release form. Now, after four appeals, they still wouldn't help. Why not send a schematic with a restriction on posting it elsewhere? And having a local repair shop spend a couple hours on an amp is just not cost effective anymore. Cheaper to get a working unit elsewhere. I hate having to scrap things though.

Thanks again, guys.
Bill

[Enzo]

As a Behringer service center I an VERY familiar with their construction. I have no trouble getting ICs off with the Chip Quik. The stuff stays melted for more than enough time to twist the IC, which poops the glue free.