PV6 USB schematic

[Nyqusit5]

Hi all,

I am looking for a Peavey PV6USB mixer with a faulty psu section. Unlike the bigger models, it employs an external psu but has some regulating circuit that is shot in the one I have for repair. Anyone has it?

I have emailed Peavey's repair service at least 5 times and got no reply whatsoever. They used to be very quick to help up until a few month ago. Anyone knows what's happening over there?

[Enzo]

Which repair service where?

For schematic requests I recommend customerservice@peavey.com


But also contacting customer service at euro-peavey should work. The repair guys are busy repairing, and they try to help, but they aren;t really the ones to ask for drawings.

What specifically is your problem?

[Nyqusit5]

Tanks Enzo.
Yes I did contact them at the address you mention.
The problem is that the external psu works but the mixer doesn't switch on because of SMD components I cannot identify.

[Enzo]

Um, if we don;t know what they are, how do we know they are at fault? Is there no silk screening on the board?

[Enzo]

Just remembered, the factory was on summer vacation earlier this month. They all go off at the same time.

[Nyqusit5]

That could explain the recent silence, yes.

I believe one or more is at fault since the voltage supply dosen't go past them. But without a schematic, I really can't go beyond this simple observation...

[Bodib]

Hi to All. This schemtic for PV-6USB power supply

[Nyqusit5]

Great, thanks a bunch!

[wichin12]

Hi all, could someone post this schematic again please. Thanks

[marcas58]

pv6 schematic

here the schematic, i hope this help you
regards..!!

Hi all,

I am looking for a Peavey PV6USB mixer with a faulty psu section. Unlike the bigger models, it employs an external psu but has some regulating circuit that is shot in the one I have for repair. Anyone has it?

I have emailed Peavey's repair service at least 5 times and got no reply whatsoever. They used to be very quick to help up until a few month ago. Anyone knows what's happening over there?

[wichin12]

Thank you very much

[Blewey]

Great, thanks a bunch!

Did you figure the problem? I'm afraid I have the same issue. I got the schematic, thanks to you guys, and I opened up the box, with some finesse I think I can replace whatever is wrong.