I have looked without luck for the schematic for a Behringer BXL3000 bass amp. I saw where ENZO helped in another thread by giving a different amp model, that was available, and used the same power amp. The power amp in this is a LPA1300, and that is the part that I need.
This appears to be a flying rail design with grounded collector bipolars. The rails here are skewed 90V and -8.2V, but nothing obvious(to me sans schematic) is causing the shift.
This appears to be a flying rail design with grounded collector bipolars. The rails here are skewed 90V and -8.2V, but nothing obvious(to me sans schematic) is causing the shift.
Comment