Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

RODE NTK MIC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RODE NTK MIC

    Anybody here on the forum have a schematic for this MIC and Power Supply??? I have one here that is causing a crackling sound after it warms up..sometimes it will take longer than others.....The tube has been replaced but the problem remains.......can't see anything obivious....
    Cheers,

  • #2
    Did you contact Rode and ask them for it?
    Education is what you're left with after you have forgotten what you have learned.

    Comment


    • #3
      Originally posted by Enzo View Post
      Did you contact Rode and ask them for it?
      Yes i did...I contacted the Canadian Distributor......Haven't heard anything back yet......
      cheers

      Comment


      • #4
        May I suggest, unless they reply in the next day or two, that you CALL them. And also, a distributor is not the manufacturer, so try contacting RODE themselves.
        Education is what you're left with after you have forgotten what you have learned.

        Comment


        • #5
          I thoroughly agree with Enzo.. contact Rode.. they may not supply schematics but will offer support.
          The NTK mic according to the Australian web site
          RØDE Microphones - NTK

          has an extended 10 year warranty if you registered your mic in the first year of purchase.

          I have found Rode to be excellent with their response and backup.

          Check the tension of the tube socket pins .. and use the old one to spray some deoxit on it's pins and work it in and out a few times.

          Can you borrow another PSU ? or hang a o'scope on the unit and see if it's spitting !

          Comment


          • #6
            A quick check on their web site gives service agent / distributor as

            6-1275 Newton Street
            Boucherville, Quebec, J4B 5H2
            Canada

            (450) 449-8177

            info@adi-online.net

            Audio Distributors International | We know music.

            I assume these are the people you have already contacted

            Failing that, contact Rode in Australia by email info@rode.com RØDE Microphones
            Or by phone +61 2 9648 5855 2pm Vancouver time is Sydney 9am

            I have several Rode mics that i use for micing guitars and drum overheads, they are great mics.
            I have not had to deal with them for service, but i think they would bend over backwards to help you.

            If the unit is under warranty, then you should be able to get it repaired under warranty

            RØDE Microphones - Contact under "change country" select Canada

            Comment


            • #7
              Originally posted by mozwell View Post
              A quick check on their web site gives service agent / distributor as

              6-1275 Newton Street
              Boucherville, Quebec, J4B 5H2
              Canada

              (450) 449-8177

              info@adi-online.net

              Audio Distributors International | We know music.

              I assume these are the people you have already contacted

              Failing that, contact Rode in Australia by email info@rode.com RØDE Microphones
              Or by phone +61 2 9648 5855 2pm Vancouver time is Sydney 9am

              I have several Rode mics that i use for micing guitars and drum overheads, they are great mics.
              I have not had to deal with them for service, but i think they would bend over backwards to help you.

              If the unit is under warranty, then you should be able to get it repaired under warranty

              RØDE Microphones - Contact under "change country" select Canada
              Thanks Moswell....I contacted them already in Canada....I sent off an email to Rode in Australia....Hopefully I will hear back from somebody soon...
              Cheers

              Comment

              Working...
              X