Behringer Europower PMP5000 Schematic nedeed

[Emetal]

Hey people does anybody have Behringer Europower PMP5000 Switching Power Supply schematic, and an Amp board schematic?

[Enzo]

What are the board numbers? Is the amp an HCA2400 maybe, and the power supply maybe SPS1000?

[vintagekiki]

http://music-electronics-forum.com/attachments/34723d1436203248-behringer-pmp1280s_5000-mixer-sch.zip

or

https://music-electronics-forum.com/showthread.php?t=41121

[Jazz P Bass]

PS schematic: Behringer HCA2400 DPA.pdf

Take note that the driver IC (IXD404) is not available anymore.
It can be replaced by the IXD604 though.
IXD_604 SI.pdf

[Emetal]

Yes exactly!!! HCA2400 I got from above replies all I need is SPS1000/02 now please!

[Jazz P Bass]

SPS1000 schematic: SPS 1000.pdf

[Emetal]

Thanks !!!!!

[Emetal]

The above HCA 2400 DPA pdf is Sheet 2 of 2. Does anybody have Sheet 1 of 2?
I have a problem with C92 which is electrolytic SMD cap. Accidentally I bumped it and it fell of completely with the board traces.
I need to make some bridges with wires and I need to know where to connect.

[Enzo]

C92 is at the input, it connects between X11 pin 2 and R126. + end towards the resistor. That is the INPUT B circuit.

C92 is the equivalent to C93 in the INPUT A circuit, which use as a model.

It is a 4.7uf 25v part.

[Emetal]

Thanks, I would still love schematic if possible :-)

[Jazz P Bass]

Here is the HCA 2400, Pg 1 & 2:
Behringer HCA2400 Digital Power Amp (Rev.F) Schematic.zip