Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Line 6 Pod XT Pro schematics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Line 6 Pod XT Pro schematics

    Anybody have schematics on the Line 6 Pod XT Pro rack unit? I have one that's stuck in a boot loop and one that starts up but has no sound.

  • #2
    See page 30 for hard reset
    nosaj
    http://http://bee.mif.pg.gda.pl/cias...ice_Manual.pdf
    soldering stuff that's broken, breaking stuff that works, Yeah!

    Comment


    • #3
      Isn't that the service manual for the Pod Pro, rather than the Pod XT Pro?

      Comment


      • #4
        Reset procedure seems to be the same across the board.
        nosaj
        soldering stuff that's broken, breaking stuff that works, Yeah!

        Comment


        • #5
          I've done all the different resets and firmware installations I can think of, both racks result in the same issues. I'm thinking the one with no sound would be a power issue somewhere, and the one in a boot loop might be a potted plant unless it has some standalone bios.

          Comment


          • #6
            ...
            Attached Files

            Comment


            • #7
              sugeda to the rescue again!
              "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

              Comment


              • #8
                Considering it has an effects loop, try jumpering it to see if you get sound if you do clean the jacks.
                For the one stuck in reboot loop. Page 3 check your power rails and see what you have..
                nosaj
                soldering stuff that's broken, breaking stuff that works, Yeah!

                Comment

                Working...
                X