Announcement
Collapse
No announcement yet.
Search Result
Collapse
15 results in 0.0039 seconds.
Keywords
Members
Tags
-
Thanks for your comments guys, much appreciated
-
Marshall DSL JCM2000
Hiya all,
Just a question to the experts on here (of which I am not one):
I had a DSL 100watt head a friend left in for me to...
-
Hi all,
I replaced R6 and R9 (1ohm 1watt) and fitted a new set of matched power tubes. Switched on and everything looks good so it looks like...
Leave a comment:
-
NOS???
Hi All,
I'm relatively new to the site due to the fact that a few mates of mine have asked me to repair their valve amps. I was up until about...
-
Thanks for the feedback Amp Kat.
I've a matched quad set of Mullard EL34's on order and should have them by tomorrow. Will get back to you...
Leave a comment:
-
Many thanks AmpKat.
This is a 100watt head so there are no spare sockets either side of the tubes. I did check for continuity between pin3...
Leave a comment:
-
JCM2000 DSL100 Problem
Hi all,
Mate of mine has just dropped me off his faulty Marshall DSL100 head.
Had a quick check and the pre-amp looks to be...
-
I've just about given up on repairing this amp myself guys
I have re-soldered absolutely everthing, tightened valve seats, tightened all...
Leave a comment:
-
Hi All
I bought a new pre-amp valve (ecc83) and rotated through each position but the problem is still there! I had the amp on tonight upside...
Leave a comment:
-
Thanks for the info on this problem Amp Kat. Really appreciate it.
Right, next stage I need to change my valves so this is unchartered territory...
Leave a comment:
-
An Update:
I was checking out my amp last night and as usual when I powered it up it started the squealing noise for several seconds and then...
Leave a comment:
-
Thanks for this, I'll get a look later tonight to see if I can find anything obvious. As I said in my original post, its a new amp so I can't see any reason...
Leave a comment:
-
Marshall DSL50
Hi,
I recently bought a JCM2000 DSL 50 head which was only a few months old.
I've it hooked up to a 4x12 cab. Everything was fine for...
-
Thanks for the help guys. I'll get a look when I get back this evening and keep you posted on what I find.
Leave a comment:
-
Marshall JCM2000 Fault
Hi Everyone,
I'm new to the site and in the search of some help.
I'm not familiar with working on amp repairs (televisions...
Leave a comment: