I found it! I had posted to a group of techs (who weren't able to help), but I posted the solution I found just to document it.
Finally got...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
91 results in 0.0069 seconds.
Keywords
Members
Tags
-
Wow... I don't recall. That was 10 years ago. If I spent money for an engine board, I think I would remember if I didn't get it working, but I don't recall...
Leave a comment:
-
B52 AT100 schematic
Hi, Juan!
Enzo put it up in another thread: https://music-electronics-forum.com/attach...
Leave a comment:
-
B52 AT-100 Power transformer measurements?
Has anyone measured and recorded the secondary winding voltages for the B-52 AT-100 head? (Or do you have a working one that you can take measurements on?)...
-
Need gut shots for Kay 610
Does anyone have an original Kay 610 amplifier that would be willing to take detailed pictures of the wiring for me?
A customer brought one...
-
The diagrams I have don't have a part number for the board, and the board actually doesn't match the diagram that I do have. The DAC is a YM3009.
...
Leave a comment:
-
The tool of the next generation is likely to be a dumpster. Just about everything built nowadays is so cheap that it can be replaced for less than the value...
Leave a comment:
-
Wanted: DM board for Yamaha Clavinova CV-100
I have an old Clavinova in the shop with bad output from the DAC. None of the parts are available anymore from Yamaha or any of the resellers that I can...
-
Here's another idea.... a bit simpler and cheaper.
Go to your local home improvement store or hardware store and look for water heater elements....
Leave a comment:
-
For me, the problem for most repairs is not the difficulty of repair, but the fact that the item is so inexpensive that the cost to replace is not much more...
Leave a comment:
-
Enzo, best wishes for a happy retirement.
You might watch for hamfests in your area.... that kind of stuff would probably be popular at one....
Leave a comment:
-
Those links don't seem to work for me anymore. I just get a black screen. It looks like they were stored on the forum. Did they go away?
Leave a comment:
-
Here's a picture of the boards containing the XLR male jacks. The thing that makes these special is that the rim on the face is designed for a 7/8"...
Leave a comment:
-
I located the manufacturer finally - Zhejiang Zhengwei Electron Electric Appliances Co., Ltd. Their products can be found at Zhejiang Zhengwei Electron...
Leave a comment:
-
Whose logo is this?
Can anyone identify the manufacturer that uses this logo? It's used in connectors that are not available from the equipment manufacturer, and I would like...
-
Need schematic for Zoom 9030 Analog board
Does anyone have the complete service manual for the Zoom 9030?
I obtained part of it from Samson, the US distributor for Zoom, but it was...
-
Here are a couple of tests you can make:
Shorts test: Connect a neon lamp (NE-2 or similar with a series resistor - 47K typical) across the...
Leave a comment:
-
Leave a comment:
-
Put your device numbers into the search field on this page:
All Transistors Datasheet. Parameters and Characteristics. Transistor Database...
Leave a comment:
-
Kurzweil PC2x - no sound
I have a PC2x on the bench that is driving me nuts. It has no audio output, and no signal from the DACs. It passes all the diag digital tests (RAM, ROMS,...
-
Thanks for the link, although all the ones listed with stock are overseas with large minimum orders.
The Newark entry is a link to Farnell...Last edited by techineer; 08-10-2011, 10:41 PM.
Leave a comment:
Leave a comment: