Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.2556 seconds.
Keywords
Members
Tags
-
The gold standard for DC gaussmeters is the AlphaLab DC magnetometer. There's one on Ebay now for $100, but has no Hall probe to go with it. Alphalab could...
-
Fender spun the magnet against a rotating grinding wheel. But only Leo did that. In '65 and later, they were not beveled at all. They were tumbled in a vibrating...
- Likes 1
Leave a comment:
-
There's also another Chinese company I bought from recently who also have rough cast, that are really good magnets. Maggie Yu. Their rough cast look very...
-
Well, thats not true. Back in 2007 there were no rough cast magnets, but then I worked with Magnetic Hold and Allstar who worked with the Chinese seperately...
-
Yeah, I just met Max couple weeks ago. Just listened all his bucker bars, they are different and good enough I bought all the grades.
-
There's so much bogus nonsense out there about magnets. Every company has different sounding magnets. There is NO standard alnico recipe that they all use,...
- Likes 1
Leave a comment:
-
Step drill would be your best bet I think. Make a block of wood that sits solidly inside the cover first, so you have support otherwise you'll tear up the...
- Likes 1
Leave a comment:
-
Need affordable source for metals lab analyses.
I need to get some vintage metal parts analyzed for chemical content, but my old source got bought up and no longer responds. METL is too expensive anymore...
-
Thanks! I found out StewMac carries this exact tape now. Allparts had 7mm and 6mm widths, I used 7mm quite often, StewMac just has half inch and 6mm. Half...
Leave a comment:
-
The end of Toyo tape?
Allparts isn't selling Toyo paper tape anymore. If you order it, they send you black crepe drafting tape. Called them and they said their buyer can't get...
-
When I had the first rough sand cast alnico recreated back in about 2007, I had Allstar and Magnetic Hold both work with the Chinese to accomplish that and...
Leave a comment:
-
I just got a quote from a local small shop guy. 80 rods, six feet long, EIGHT THOUSAND DOLLARS. $3.20 each. Yield about 2500 keepers.
I decided to...
Leave a comment:
-
P13's were lacquer potted. But these were air coils with no core. As I stated above, lacquer does not penetrate the coil, just a couple outer layers. This...
Leave a comment:
-
This looks like your best bet, but the cover itself may end up destroyed, worth a try though.
Leave a comment:
-
Its not really low impedance if you're converting it to high impedance with a transformer. I don't get the point of that. A real low impedance pickup is large...
Leave a comment:
-
I prefer emails because you have a written dated record of the communication. Phone calls vanish the second you hang up. I won't order baseplates from them...
Leave a comment:
-
OK, I called and my money has been credited to my account. But beware they do not reply to their online contact form, nor to emails, which is just really...
Leave a comment:
-
Is anyone else having problems with Allparts?
I've been buying a few minor items from Allparts for probably 14 years now. They've always answered emails, always helpful. My last order was $330 of one...
Leave a comment: