That makes me suspect a wiring issue in that room.
Any time a guitar buzzes and it stops when you touch it, you have a ground problem. If it...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
284 results in 0.0204 seconds.
Keywords
Members
Tags
-
Thanks, that's what I thought. But not even near positive...won't be hard to find, it has a small board a little bigger than matchbook size mounted on posts...
Leave a comment:
-
Bill - I have measured it not plugged in, 24 or 25 volts. Hard to tell with an older analog meter and I'm not sure how accurate it is either. Most of my 9V...
Leave a comment:
-
That's what I'm thinking. Batteries and wall warts both are not all that accurate voltage, and with most things a small voltage difference shouldn't be a...
Leave a comment:
-
Power Supply Question
Went to band practice last week, other guitar player handed me a couple of old pedals he had sitting in a shed for 10 years or more. After I cleaned up the...
-
I've never had one that was fanned...My Takamine is made the same way, 3 on a side angled down like a les, I cut it straight. Old Harmony is 6 on a side angled...
Leave a comment:
-
I know I'm a bit late, haven't been lurking much recently...
I tried the silver bullets, wasn't impressed, went back to my all time favorite,...
Leave a comment:
-
Chuck H beat me to it, I was going to suggest the same thing. Those are very reliable, don't mind charging in bunches, and last all day in my 18V cordless...
Leave a comment:
-
OK thanks guys, one at a time...
Dave H - you were right, I got to tinker a little this afternoon with nobody around and crank it, seems it does...
Leave a comment:
-
I'll try that.
No I haven't tried it with an external speaker, the only one I have is 4 ohms, not good for a 8 ohm amp. Wish I had one, I think...
Leave a comment:
-
Fender Pro Jr More Bass
I got a Fender Pro Jr at a yard sale sometime about July, under $50 I figure that's not bad...works fine after I re soldered all the tube sockets. I think...
-
Kingston.
KINGSTON VINTAGE BASS GUITAR
Kingston vintage sixties violin bass guitar | eBay
https://www.guitar...Last edited by Paleo Pete; 12-13-2015, 12:24 AM.
Leave a comment:
-
Enzo - Thanks for that explanation in your first post. I remember those days too, I started using a foam wind screen on my mic for that reason. Flip every...
Leave a comment:
-
If the dowels are glued in well you should have no real problems drilling into them. It's the neck, not the body, that is critical. The holes in the body...
Leave a comment:
-
Back to Richard's question about scale length.
Distance from octave to bridge saddles and nut to octave must be the same. If not the scale...
Leave a comment:
-
Haven't looked at this thread in a while...The only time I use Ubuntu was an older version from about 5 or 6 years ago, pretty good but a bit sluggish on...
Leave a comment:
-
I have an 80's Peavey MX, this amp
Peavey VTX MX 1 2 Stack Guitar Amplifier | eBay
It has a fan mounted in front, behind the...
Leave a comment:
-
I agree with that, I love a zero fret. I Have an old Epiphone FT130 acoustic that's damaged, I've been seriously considering building an electric guitar just...
Leave a comment:
-
I like that idea. I've been thinking about trying a graphite nut on my Squier, it binds every time even though I use a pencil on it. The pencil lead helps,...
Leave a comment:
Leave a comment: