Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.1792 seconds.
Keywords
Members
Tags
-
Where I used to work there was a small electronics shop with a couple of technicians to keep the lab equipment in good working order. They had a stash of...
-
I followed the Ceriatone grounding scheme as on the layout, with the star ground, and also used an aluminum sheet as a shield as shown. The amp has exceptionally...
Leave a comment:
-
The schematic and layout you posted is not a Ceriatone, and is significantly different. I used the Ceriatone layout on my Dizzy 30 and had no problems. Ceriatone...
Leave a comment:
-
On the M13, don’t be surprised if the schematic doesn’t match the amp exactly. On my M13A, I found significant changes, even though the amp appeared...
Leave a comment:
-
I have one of those necklace reverbs from a PR-40 tone cab. Is there any reason to use the necklace reverb over the conventional stretched spring tank for...
Leave a comment:
-
Yes, and Hammond has the patents on the spring reverb. They used to make them in house and then started up the Gibbs company to make them....
Leave a comment:
-
This one appears to be exactly like what’s in my M13A.
https://www.ebay.com/itm/GIBBS-sprin...-Vintage-Tube-...
Leave a comment:
-
My M13a cabinet also has the angled piece of wood between the amp and the speaker....
Leave a comment:
-
I just found a picture online at Chicago Music Exchange. The M15 has the same style of aluminum box to mount the reverb pan.
https://www.chi...
Leave a comment:
-
Yes, my tank is mounted vertically on the rear cabinet wall in a 3-sided aluminum box with foam....
Leave a comment:
-
DCR measurements are 177 ohm output, and 173 ohm input.
It’s a 17 inch long Gibbs 2-spring tank.
No model# on my tank, but I believe the...
Leave a comment:
-
I don’t have an M10, but I do have an M13a. The M13a also uses a 12AU7 to drive the reverb tank. I’ll measure the impedance of my tank and post...
Leave a comment:
-
Maybe this helps.
https://www.nde-ed.org/GeneralResour...ivity_Iron.pdf
https://books.google.com/books?i...Last edited by Diablo; 01-09-2020, 10:01 PM.
Leave a comment:
-
I don’t believe the value given in that table for pure iron. The value given for 1010 steel is correct and should be the same for pure iron.
...Last edited by Diablo; 01-09-2020, 09:42 PM.
Leave a comment:
-
No, those measurements are for 1.5 Tesla / 60Hz. You won’t ever find relative permeability numbers for different types of steel because the permeability...Last edited by Diablo; 01-09-2020, 02:32 PM.
Leave a comment:
-
I had an Ampeg Dan Armstrong guitar many years ago, and it was designed so you could just plug in different voiced pickups. Maybe that idea needs to be r...
Leave a comment:
-
Thanks again for taking a look at the miswired circuit. It’s definitely not the way to hook up the MV control, based on the sonic results at low settings....
Leave a comment:
Leave a comment: