Announcement
Collapse
No announcement yet.
Search Result
Collapse
76 results in 0.0217 seconds.
Keywords
Members
Tags
-
Electrosonic Amps did some real cool stuff with Durabak. Looks like their site is no longer up, but a google image search turns up some good examples of the...
-
Sorry, I pulled it down after seeing Diablo's reply. As usual, I was missing the obvious info staring me in the face that without the rectifier tube in there,...
Leave a comment:
-
Yeah, it's pretty good. You can hear it in the room of course, but it's more like having a muiffled stereo on. The loudest amp I've used it with is a souped...
Leave a comment:
-
For under the board runs on turret boards, I strip the wire enough that it goes all the way through the top of the turret so I can bend it over. That way...
Leave a comment:
-
Hi, I made an isolation box out of 3/4" mdf, and 2 layers of sheet rock on the outside - glued on with regular ol' silicone & sheet rock screws....
Leave a comment:
-
Hi, I've done this to a couple guitars & I love it - the "Neil Young" switch. I use a DPDT, the signal from the pickups goes to one center pole,...
Leave a comment:
-
My 72 PR is in a head box & it's very quiet, so I'd think the distance between the tank & chassis should be ok for yours. Though if the tank is oriented...
Leave a comment:
-
Hi there Bloop. Unfortunately, I don't think it's going to be that easy for you. If your cab has two 8 ohm speakers, they can run either two sources at 8...
Leave a comment:
-
Absolutely not an amp guru here, but I'll give it a shot. The original was made to run on lower line voltage than we have nowdays, so it's putting out a higher...Last edited by theunrulychef; 07-30-2009, 08:04 PM.
Leave a comment:
-
Sorry, kinda dropped out of my own thread here. Been trying to figure out wtf I want to do with this thing before I start building anything & plan it...
Leave a comment:
-
-
Cool, thanks Octal. After reading about that cathode follower a couple times, it's finally sinking in why the extra current is needed. I'm glad you've let...
Leave a comment:
-
Yeah, but were you high?
Seriously though, I've used alot of stereo panning delays & that sort of thing - panning trem pedals &...
Leave a comment:
-
Tremolo to Panning conversion
Hey all, I'm building a stereo vibro champ sort of thing. Instead of having 2 individual tremolos, I'd rather have a "panning" effect. My thinking...
-
Yeah, but then what would you build nights & weekends?
Here's another one: Spoon. Pretty much all their records have Grade A guitar...
Leave a comment:
-
Hmm, it's like asking what we're all wearing today.
These all tend to give me the willies down my spine every time though:
Link ...
Leave a comment:
-
Send me your tubes, and for $49.95 each + $6.95 Shipping & Handling, I will put them through my special Microphonic Induction Process or MIP®. Your amp...
Leave a comment:
-
-
Ok, sounds like it's ok. Even with full discharge through the speaker & into the OT, I wouldn't be surprised if everything was fine. I'd be more concerned...
Leave a comment:
-
The amp still sounds fine? If it sounds ok, then it's ok.
When bleeding, you only need to go from ground to the main reservoir cap since all...
Leave a comment:
Leave a comment: