Modifying Allen & Heath ZED 14 for direct outputs?

[parallelfields]

Im thinking about doing a modification for Allen & Heath Zed 14 mixer. I would be tapping after the faders and put outputs female plugs behind...

[soundinvst]

I was given a Yamaha EMX66m with the power switch removed. The service manual has the part number as VU859100 for the switch and VU859000 for the button....

[obiwanjacobi]

Hi,

I have a Soundcraft Live 8-channel mixer for repair.

The question I have is about the differences in gain between the channels....

[kasper]

hi

a couple of days ago my friend gave me his "old" pmp3000 because it dident work (i once repaired his iphone so i must be a tech...

[nunosga]

Hello,
Here's what I have in mind.
I want to build a compact mixer/switch. I could have just one knob that would be a fader to blend the mix...

[tubeswell]

I've got one of these in for repair. Intermittent distortion and cutting out (well that's how the owner described it). One of the output transistors is faulty...

[nylicens]

Hi. I am working on a Mackie 1604. Complaint was loud hum in studio. Pulled the mixer and hum went and then opened it up and discovered the LM337 had 1/2v...

[Brian Swatton]

I may need to try and repair one of these desks in a studio rather than at my workshop, so hoping to get info on best access and circuit diagrams if at all...

[guysing]

Hello all!

I am working on a PHONIC 780 plus powered mixer. The problem started with the effects display acting intermittent with the effects...

[Dave Johnson]

Hi, I need the monitor master volume pot for a Mackie 808M powered mixer. I have the pot out but can't find any ID info on it other than Alps 02C503. Seems...

[topsecret]

The title says it all.
My main out's are not working and the meter lights are all of the way up like a metered channel is clipping.
Nothing...

[Markkroos]

Hey guys,

I recently bought an Ernie Ball 6165 panning pedal, and here's what I would like to do:

I play a double neck guitar...

[ne0]

Hi, I have in the workshop a mixer Soundcraft Spirit live 3 MKII, which in the mono output module (SC3613B) has burned resistors R75 and R76, if someone had...

[hearforever]

I found this Pentron MM4 microphone mixer and would like to try using it for recording. It has 4 channels each going through one section of a 12ax7. I thought...

[peril100]

Hello,
I have two of the Mx3242x boards with power supplies. Is what I need is a place to buy a new 7 pin female input jack for the power cord that...

[newbambeeno]

Hey all!

I'm building a valve amp for my major project at uni and have just hit a bit of a stumbling block on some of the theory with a loop....

[GarrettWeeks]

Hi, I recently started recording my band play live through a Br-600 and I want to build something similar to a mixer to put anywhere from 8 to 16 1/4"...

[phlash]

I am having a problem with the board listed above. Its an 8 channel powered mixer containing 2 internal 500watt amplifiers. When in good working order, the...

[ltelford]

Hello all, I am wondering where I can get or if I can get the pcb to swap out for the SPS1000/01 in the Behringer mixer board.

We had and...

[auditoriumb]

I assume the PMX2000 has automatic circuit protection that cuts out the amp if you push it too much. Mine started clipping out a few shows ago and got progressively...

[efsnick]

Hello,

I have a Eurodesk SL2442FX-Pro Mixer that a friend gave me and im trying to fix so my band can use it. The board has no output on...