Originally posted by medicman
View Post
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
need some help please!
Collapse
X
-
-
Originally posted by medicman View Posti cant find any others. i wander where one could find a picture of the circuit board on this amp. so i should be okay going with a pair of 100 ohm 1/2 watt.
Eric.
Comment
-
Originally posted by medicman View Posthere is some pics. i had to remove it for some strange reason and now i cant remember wich way the arrow faced.
Eric.
Comment
-
Originally posted by medicman View Postyes sir i do.
Eric.
Comment
-
This amp has had a lot of questionable work done to it.
So far it seems to be missing the two 100 ohm filament resistors and from what I can tell, one of the filter caps in the totem stack is also missing.
The entire amp needs to be gone over in order to find out what was changed, "fixed" and what has been left out. While it's not impossible for you to fix this with enough help here, it seems to me that it is beyond the scope of your abilities to get this one working on your own. Do you have a friend with more experience that could help you with this amp?
Comment
-
Originally posted by 52 Bill View PostThis amp has had a lot of questionable work done to it.
So far it seems to be missing the two 100 ohm filament resistors and from what I can tell, one of the filter caps in the totem stack is also missing.
The entire amp needs to be gone over in order to find out what was changed, "fixed" and what has been left out. While it's not impossible for you to fix this with enough help here, it seems to me that it is beyond the scope of your abilities to get this one working on your own. Do you have a friend with more experience that could help you with this amp?
Eric.
Comment
-
Originally posted by 52 Bill View PostSorry, I didn't know that you were communicating with him off the board.
Eric.
Comment
-
Originally posted by medicman View Posti'm not sure what it is but after the amp is on for about a min or so it gets hot. and i still have no heater voltage to the tubes.
Sorry,
Eric.
Comment
Comment