Peavey Classic 30 II 2018

[lowell]

I don't have my tracer at this time unfortunately. I got one from PV, here ya go hope it's of use for someone else.

I am only getting 1.2k from Q2 (fx send driver transistor) Emitter to ground, and should be 22k. I replaced the resistor and still get that reading so I believe Q2 is dead. I haven't tested Q2 because I cannot access it until I disassemble the entire main board and remove it. I'll report back on my findings.

image_53582.pdf

[nosaj]

Super simple just put a mp3 player on amp input.. put signale tracer onto another amp and start probing.

nosaj

[lowell]

Update: Replaced Q2 and it's fixed. If anyone gets one of these in with farty tone, and a low reading from Emitter to Ground on Q2 then I'd try replacing it. In my instance, R22 was fine.

[Jazz P Bass]

Nice.
Thanks Lowell.