Correct wiring 2 x 12 fender red knob twin in series

[Jquijano]

Is there anything that isn't broken on this amp? We're here whatever comes up.

Thanks for your kind advice always Chuck. I already have a replacement push pull pot but wouldnt like to mess up the old PCB in that Amp to remove it. What are the options? How many watts on the Iron, type of tip and technique? Solder wick or solder pump?

[Chuck H]

Well I'm not a good person to ask about de-soldering because I don't do much of that. In fact "I" asked the repair pros here about it not long ago because of a project I have. I'm sure you'll get some good advice. I could probably even give it (having heard it here) but I can't back it with experience like others. So here's a link to the thread I started where our membership stepped up with good advice:

https://music-electronics-forum.com/...5-de-soldering