Behringer mx3242x power issue. Please help if you can!!

[peril100]

Hello,
I have two of the Mx3242x boards with power supplies. Is what I need is a place to buy a new 7 pin female input jack for the power cord that attaches to the mixer. I have spoken to Behringer and they said I would need to purchase a new power supply, but I already have two that work fine, just the jacks are worn out.
Any clues??
Thank you,
Jeff

[Jazz P Bass]

Not too sure of the pin arrangement.
Google "7 pin DIN connector plug".

Link:Neutrik DIN Connectors Male 7-Pin Cable NYS323

[Enzo]

It's an XLR, not a DIN, isn't it?

Mouser has a selection of them, search XLR in the audio connectors, then female, cable mount, 7 circuit

All the stock numbers start 568-NC7...

The options include straight or right angle, black or shiny, plain contacts or silver or gold plated.

[peril100]

Thank you!

You have pointed me in the right direction. I know need to figure out if one of these will be an exact match with the pin spacing or if I need to replace both male and female ends.
Thank you and if you have any more advice I am all ears and eyes!!
Jeff

[jrfrond]

We have both the cable female and chassis male in stock if you need it.

[peril100]

Hey John, Thanks for the reply. I looked over your parts list and could not find the connector for the mx3242x listed. If you could send me the part number I will call an order one!! I have two of these units that need to be fixed. I already bought one set of ends, but I need more parts for the other!
Send me the info and I will gladly order!
Jeff

[peril100]

You are a life and money saver! Thank you for the help! I got the parts from Mouser very quickly and everything is back together and functioning like it should! THANK YOU!!!!!!