BOSS RC-2 schematic needed

[coloratura]

anyone have a link or copy of the boss rc-2 schematic? i need to troubleshoot a fried one that's been plugged into the wrong PSU.

Thanks in advance!
Ash

[hanhen]

anyone have a link or copy of the boss rc-2 schematic? i need to troubleshoot a fried one that's been plugged into the wrong PSU.

Thanks in advance!
Ash

Hello Ash,

I wonder if you get any response on yor search of a service manual of the RC 2.

My RC 2 gives only the clean signal, the switch does't work.

all the led's seems to work well

the print seems to lool o.k. it misses smd C 77

greetings

Hans van koningsbruggen

[apollomusicservice]

D6 and D7 protect very well against incorrect polarity of the connected adapter. In this case,
usually D7 burned and it to be short-circuited. Check the points TP175 9V and TP177 8V DC.
C77 0u1 located between Vcc and Vss does not affect on signal passing.

[Niquel]

Hi all,
I know this thread is a bit old.
I've found another thread in a Spanish forum, regarding what the title of this thread says, that might be of your interest. There's a schematic of just a part of the digital supply.
Averķa en Loop Station RC2 : El taller | Guitarristas.info
Hope this helps.
Cheers.

[apollomusicservice]

Hi all,
I know this thread is a bit old.
I've found another thread in a Spanish forum, regarding what the title of this thread says, that might be of your interest. There's a schematic of just a part of the digital supply.
Averķa en Loop Station RC2 : El taller | Guitarristas.info
Hope this helps.
Cheers.

Thanks.