Boss ME-10 240V conversion

[stevenrb718]

Is there any way to convert a Boss ME-10 to run on 240V without having to use a step-down converter or replace the internal transformer?

[dweingarden]

I bought a Valvestate 8040 used. Looks like parts have been replaced before and the boost channel is not working.
The voltage on the tube's heater is...

[asfi]

The transformer I've got has an open thermal fuse, and as my luck it's properly buried deep in the windings so repairing it is out of the question.
...

[Shrimpfarmer89]

Hello, I am looking for a replacement transformer for an old E1A606-724 / 2-24b power transformer that has 5 wires coming off it. Cant find any online with...

[clarisso11]

Hi everyone,

I've been working on building an amplifier head around a Fender Blues Junior PCB that I got for quite cheap.

The PCB...

[zboblitt]

I have the original version of the Carvin V3 Head. I believe it's power transformer went out because I measure 5 ohms between hot and return of the IEC when...

[parentheticalfact]

Howdy y'all!
Any ideas as to a good phase inverter replacement transformer for the GA-5T amplifier? Got one here with a missing transformer so I've...

[Tumshie]

This thing's pre-amp is so hot it really amplifies anything the bass pick-ups attract, noise wise. Sometimes, it buzzes like a hornet when an instrument is...

[Shawnobi]

Hi,
Hope I've got the right forum for this question. Earlier this year I built a 5E3 circuit with JJ 6V6 tubes. However I used an output tranny meant...

[Cloutier]

Hi,

I have my friend's Traynor YBA-1 that he uses for bass. It sounds really crappy, no headroom, distorting with volume as low as 1. A sound...

[dogcatchersito]

Does anyone know where to purchase this have searched ebay, the only thing that comes close is a Peavey Classic 50 transformer
is there another transformer...

[nofarewell]

Hi All,

First of all, sorry for my English and my lack of professional language.
I am an enthusiastic amateur and I am about to build...

[T9c]

Just a heads up for everyone, if you haven't gotten the email from ClassicTone. They now offer a drop in replacement/upgrade power transformer for the Egnater...

[Audiotexan]

Not being up on the theory side... I figured I'd bring what I've found thus far here.

My current situation is this: I have a pair of HPM-100's...

[rkscott7]

My power trannie is Bad on my Hartke HA 4000 Bass Head and I have already soaked a lot of work into it so i want to get it going. I called samson they no...

[godmustuseaboogieman]

HI guys,

Thanks for some ace help in the past.

I've got an old Trace elliot that's making this funky sound. Its a purely acoustic...

[Skoked]

I am trying to find a replacement power transformer for Kustom "The Defender" 50w 1x12 amp.

I can get one from the manufacturer for...

[jussi]

Hey,

What do you think about the placement of the trannies, choke and tubes in this layout? Any obvious hum-makers? Should I use bigger chassis?...

[isaac]

Hey, I'm building a 50W two el34's and I have Power transformer that doesn't have a bias winding, just a standard high voltage 290-0-290. So I used a standard...

[CoopDaKill]

Hey guys,
I bought this Traynor YBA-3 at the flea mrkt. Upon powering it on and playing it for about 10 minutes, One of the big can...

[Austin]

Power supply transformer prices are bumming me out.

Anybody know of any super cheap power transformers for powering tube amps?
...