No, she bought me new pants. And shirts. And socks. And art for the walls, rugs for the floor, and lamps for the end tables she brought over.
...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
459 results in 0.1914 seconds.
Keywords
Members
Tags
-
Hi guys,
Thanks for your kindness. I had a pretty busy year in 2016. I rekindled a relationship with a lady I was with back in the early ninties and...
Leave a comment:
-
Theres a switch on the back to deactivate the effects loop. Try switching it back and forth a couple of times, then put it in bypass mode, and check the amp...
Leave a comment:
-
I used a CE3 in a stereo setup for many years and occasionally still do. I have two of them.
I noticed when running in stereo mode (one side...
Leave a comment:
-
I like using attenuators, like I said, I've built and use a number of them. I've given up worrying whether an amp sounds the same at 3db vs 100db. I haven't...
Leave a comment:
-
This page has a good explanation of L-pads. They can be fixed or variable. I've built several of both.
Here is a simple two stage attenuator...
Leave a comment:
-
I have seven or eight guitars, only one has a tone control, my Junior, and i don't use it on that one. I started with my Strat many years ago, and one day...
Leave a comment:
-
-
Let's say he developed the first commercially successful guitar amp attenuator. The Altair PW-5 before it was notorious for failing at inopportune times....
Leave a comment:
-
-
Scholtz claims he pretty much played all the instruments on the first record, with the exception of Barry Goudreau on Foreplay/Longtime and the drummer on...
Leave a comment:
-
I'm late to this party but here is a link to some cheap high power resistors:
4 Ohm 120W Power Resistor | MPJA.COM
Leave a comment:
-
I've been looking at those. I've been wanting to get a few and build a couple of simple guitar amp attenuators for cheap.
Leave a comment:
-
I've only done it a few times but I potted my pickups using a Dazey pot with a variable temp control. I used a combination of beeswax and paraffin.
...
Leave a comment:
-
I think a SansAmp run through a direct box will solve the OP's problem. Put a distortion box in front of it and get all the tone you need.
Leave a comment:
-
Thanks Enzo but I don't think any of those will work. These switches I'm using are generic toggles that are 1/2 inch, not 15/32".
I also...
Leave a comment:
-
Looking for 1/2 inch washers for switch
I want to replace the On/Off thingy on a toggle switch with a normal oval washer but I'll be durned if I can find them anywhere. Any suggestions? I don't...
-
Ok, I looked around on the internet and apparently they do make smaller ones. I'm not sure of the size, it's probably a 21 or 24 inch. I'll probably just...
Leave a comment:
Leave a comment: