Still got it. Let me know your email address and I'll send it to you, haven't got anywhere I can host it online.
Liam...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
122 results in 0.0108 seconds.
Keywords
Members
Tags
-
-
What Chuck said. But from my experience with these amps the filter caps often get changed unnecessarily. Get the amp to a decent tech - it's most likely...
Leave a comment:
-
-
Sorry to bump this, but...
Steve, I could also really do with a Powerstation 600 schematic. Got a dead channel I need to trace.
...
Leave a comment:
-
The Boss RE-20 is a copy of the old RE-201 Space Echo, and subsequently has delay and reverb in one pedal. Not tried one, so I don't know what they're like,...
Leave a comment:
-
MXR Carbon Copy - blinding!
Hi, long time no see everyone! (And pleased to meet those that don't know me)
Got one of those MXR Carbon Copy delay pedals today, and the...
-
What a weird and small world. Here I am looking for transformer specs for a Deluxe Electric Mistress that failed during PAT testing last week (grrrrrr!),...Last edited by Liam; 10-23-2008, 11:02 PM.
Leave a comment:
-
They end up too dim to be visible. Are you talking about surface mount components being hard to change? Not easy, but it can be done.
Li...
Leave a comment:
-
Yes, my 1989 BB reissue is definitely wired as per the 1989 schematic, although possibly not for long.
Liam
Leave a comment:
-
Thanks Ken, that's an interesting appraisal. For some reason I hadn't thought about the effect on the operating point of the PI, just had NFB on the brain...
Leave a comment:
-
Hi Ken.
Here's the original circuit. It has a 5k pot wired as a fixed resistor to ground from the NFB application point on the PI. There...
Leave a comment:
-
Thanks Ken, now can you answer my Marshall presence control question? (Don't worry, hopefully I'll get the soldering iron out tomorrow.)...
Leave a comment:
-
That's easy, in that case. Mono jack to two wires, then inside your footswitch connect to the two connectors marked 0 in the diagram below:
...
Leave a comment:
-
I don't get what he's done wrong? Ruined the resale value of a Korean 335 copy?
Have any of you ever tried to change a pot on a 335? You...
Leave a comment:
-
Not sure your 3pdt will be of much use for this. What you need is a non latching switch, they are generally single throw.
Leave a comment:
-
Parallel, unless you connect one end of one to one end of the other.
Leave a comment:
-
What you need to think about is the reflected impedance to the output tubes from the load. It goes with the square of the turns ratio. If you put parallel...
Leave a comment:
-
I like a 5751 in the first slot of my 2203. Tesla or JAN Phillips in general. The stock EL34s, depending on year, can sound a bit tinny. I like the "Winged...
Leave a comment:
-
No, it's electronics rather than semantics. The bass is NOT being reproduced in the same way as before. It's attenuated at about 3 dB per octave, and where...
Leave a comment:
-
That's not how it works. A high pass filter can't add anything, it either lets things through or it doesn't. A schematic with the current resistor and cap...
Leave a comment:
-
As ever I don't know very much, but a bit of a non-sequitur (sp?) there. If all the resonant peaks building together in series cause a problem, it's got...
Leave a comment:
Leave a comment: