Thanx!
...and then there is ceramic......
Announcement
Collapse
No announcement yet.
Search Result
Collapse
157 results in 0.0070 seconds.
Keywords
Members
Tags
-
Not having a chart nearby makes it impossible to site any percentages of aluminum, cobalt, etc. etc. that make up the different rod magnets for Fender pickups...
Leave a comment:
-
yowza.....Thanx for reminding me about that! Lately I've been making neck pickups that are taller than usual....
Leave a comment:
-
What I should have said is I want to fatten up the tone a bit by increasing the physical size of the coil. [but not adding wire]...
Leave a comment:
-
The idea is to increase the size of the coil but not increase resistance.
Leave a comment:
-
Would the treble [highs] increase as well?
I thought the greater inductance would yield less high end....
Leave a comment:
-
-
Strat Pickup Experiment
Hello everybody ! I've been away from the Forum for awhile and wanted to try something different [for me]. I wound a basically stock Strat bobbin [42 g...
-
I just built this Orpheum Fuzz. Pretty much a Fuzzrite circuit. I didn't have a 10 Meg resistor so I substituted it with a 2 Meg and am wondering how...
Leave a comment:
-
-
Would the tightness of the coil be a result of wax potting after the winding is done?...
Leave a comment:
-
Tension comes from my hand / fingers. Since I wind with a sewing machine I have to keep things simple and basic. Seems to be working out ok since so far...
Leave a comment:
-
Changed it for a lower-gain tranny..........still making too much racket. Maybe use lower gain transistors for the whole circuit.....
Leave a comment:
-
Yup... I'm considering swapping Q 3 for a lower gain tranny....
Leave a comment:
-
I used much thinner hook-up wire then I normally use........wonder if that created the howling ?? Underneath the oscillation it sounds like the circuit...
Leave a comment:
-
Yup, I built a few FF's, Tonebenders, and Treble Boosters awhile back and then recently became interested in the finer points of shaping the tone and distortion...
Leave a comment:
-
I'm wondering if anybody has done a sonic comparison with these circuits. The 2.2 uf input cap alone on the Fuzz Face makes a big difference [then, there...
Leave a comment:
-
-
Anybody have a preference for either the TB or FF circuit? The input and output caps alone make a difference in the personality of the pedals but there...
Leave a comment:
-
Oh yeah....I remember the Freestomp site! I discovered it when I was making silicon treble boosters a few years back. The trick was finding a transistor...
- Likes 1
Leave a comment:
-
The germanium Fuzz Face is an easy transfer to a silicon circuit and the Vox can have some values changed along with using NPN transistors to achieve the...
Leave a comment:
Leave a comment: