84 results in 0.0050 seconds.
-
Boss ME-10 240V conversion
Is there any way to convert a Boss ME-10 to run on 240V without having to use a step-down converter or replace the internal transformer? -
Dealing with Cellular RF noise, or determining if it is the culprit.
This post will be long, my apologies, but I want to be as detailed as I possibly can be in explaining both what I'm experiencing and what I've tried/tested... -
Original DL4 freezing
I have an original DL4 that freezes up shortly after freshly being turned on. Usually cycling through the effects quickly will lock it up. Restarting the... -
Electronics fault with my Electric guitar setup?
Hi there been having issues seemingly with my E-gtr at the moment, accept I can't diagnose what the issue is, a cable, pedals or the guitar itself.
... -
Boss ME-50 issue
Boss ME-50, originally with no power. Found voltage rails but seemed to be missing the 3.3V. Replaced a couple blown capacitors, a blown transistor, and... -
Line 6 FM4 startup issue
Anybody have any thoughts on FM4 that won't kick on? Had a short on the 3.3V line that located to the 56364 IC at U2. Replaced the IC and seem to have proper... -
Arion SCO-1 schematic
Anybody have the schematics for the Arion SCO-1 Stereo Compressor pedal? TIA. -
Boss ME-50 not powering up
I have a Boss ME-50 that isn't powering up. I have 9V at various places, but I believe I'm missing the 3.3V line. The schematic I found online doesn't zoom... -
CTS Pot Replacement
Good evening (depending on where you live),
I'm about to replace a potentiometer in a 2020 Gibson Explorer. It says "440-70035B 1948 CTS"... -
80s Guyatone pedal replacement sliders
Anybody know where I can source some slider pots for a few different Guyatone guitar pedals from the 80s? They're thinner than most of my parts, and also... -
Gibson Les Paul Grounding question.
Hi everyone. The grounding wire in a Les Paul which travels from the Bridge to the pot cavity and is soldered to all four pots, but does it need to be soldered... -
Custom Pedal Switch Build - Tone affected by relay
hi,
I'm building a customized guitar pedals switch. I tried two different kinds of relays, first I tried with the TQ2-5V-3 Panasonic Low Signal... -
beginner amp builder questions
hello! I am new to guitar amp building and have some questions about how to go about building amps.
1. how do I figure out how much voltage I... -
Fishman Fluence modern pups custom wiring ?
Hi,
I'm planning on setting up my Schecter demon-7 with a set of Fishman Fluence Modern pups and have drafted a modified version of the Fishman... -
Need help fixing guitar buzz
-
In need of the best multi effects pedal for the money
Hi there, i've decided to try and go down the route of a multi effects pedal, and I was wondering if anyone could suggest something which is great value fo... -
Jolana Iris Humbucker - Wiring Advice
Hey ya’ll, I’m pretty new to guitar electronics and I need some advice as to how I should go about hooking this thing up to my pots. I know that the black... -
Blown Transformer on 2006 Carvin V3
I have the original version of the Carvin V3 Head. I believe it's power transformer went out because I measure 5 ohms between hot and return of the IEC when... -
Pearl ss 061 mystery
Trying to get an amp working for the band and have no idea what kind of power cord is required. I've gone to 3 guitar shops and have had no luck in finding... -
Boss HM-2 Issue
I have a Boss HM-2 that visually is doing everything it's supposed to. Powers up with both 9v and adapter, LED comes on, switch turns LED on and off, but... -
Dunlop UV-1 Univibe issue
Hey guys. I have a UV-1 Univibe where the vibe LED seems to intermittently do what it's supposed to. The LED will always oscillate, but at full settings...
