Could I maybe get some help in salvaging an old Bud Box MXR Dynacomp?
When I got this thing on my desk, it had holes drilled...
13 results in 0.0028 seconds.
-
Help with Bud Box Dynacomp
Hi!
Could I maybe get some help in salvaging an old Bud Box MXR Dynacomp?
When I got this thing on my desk, it had holes drilled... -
Big Muff in Small Spaces
I've been working on a Big Muff PCB (Version 2 Violet) that fits in a Hammond 1590N1 enclosure (4.77 X 2.6 X 1.39). The pots are on the trace-side, and components...Last edited by chinrest; 10-15-2013, 07:28 PM. Reason: The copper text on the PCB was backwards. Probably not the only mistake!! -
Mxr distortion+ help!
I recently bought a older mxr distortion+ pedal at a pawnshop for $30. Dont know how old it is but its not one of those -plastic cased ones. It has a red... -
MXR M118 Signal loss
Hi All! Does anyone know why my Green MXR Analog Delay (M118) is not passing the delayed signal through either output ( mix / delay only. Before it went out... -
Vintage MXR Flanger that makes a metronome noise
So I have an old MXR Flanger with the 3001-102 PCB, so it's from '77 or around then; grey box. I plug it in and this is what happens:
All of...Last edited by docSanchez; 10-15-2010, 04:18 PM. -
MXR Micro Chorus
I'm looking for a schematic for the old mxr micro chorus. I've scoured the internet, and this seems to be the one that can't be found. Even the wiring connections... -
Help needed with MXR Phase 90 repair
Here's the problem. When bypassed, the signal is fine. When the effect is activated, however, the LED lights up but the signal is very low in volume. With... -
MXR dynacomp 3pdt led mod?
Newbie here, trying to mod a 1975-1978 mxr dynacomp to add an on/off led indicator. So far, I understand I need a 3pdt switch. I have that and all the other... -
Dynacomp debug: board not working!
I transplanted my 1975 Script MTR Dynacomp into a custom pedal enclosure and added a much needed LED, DC jack & 3PDT. I followed this diagram http:/... -
MXR micro-amp or BOSS OS-2???
I recently bought a Big Muff Pi and BOSS OS-2. I couldn't be happier with the Muff, but the OS-2? I'm way underwhelmed. Even with the Overdrive, Distortion,... -
MXR Dyna Comp static noise problem
I'm having issues with my mxr dyna comp peddle. I'm getting a static like noise coming from the "sensitivity" nob and the signal itself cuts in... -
MXR Phase 100 mods
Hi all,
I'm new here and after searching the net countless times for mod info, I joined. I've done tons of mods over the years, built kits... -
MXR Phase 100 late 70's block - Pulsing LED?
Hello,
I'm interested in adding an led to an old block MXR phase 100 (late 70's I believe) and was wondering if it is possible to add an led...
